The Cable Matters 15 pin SATA to 4 SATA Power Splitter Cable is an essential component for building, upgrading or repairing computers. The 18-inch cable harness provides sufficient length to neatly power up to 4 drives. Connect with a single cable to minimize the impact on airflow in your computer case.
Cost-Effective 2-Pack
This convenient 2-pack of SATA power splitter cables provides a spare or replacement power cable for an upgrade or repair.
Important Note
Check the rating of your power supply to confirm that it can support additional drives
Built to run 24/7
1) 4x 15-pin SATA receptacles to drives
2) 15-pin SATA male plug to PSU
- Supports 3.3V, 5V, 12V voltages
- 2.5" and 3.5" SATA drive compatible
Cable Specifications
Total Cable Length: 18 inches
Receptacles spaced at 4.5” intervals
UL 1007 18 AWG wire
Power Sharing x4
Upgrade your SSD for better speed
Install a new HDD for storage
Add an optical drive for convenience
Features
SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies; Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection
Upgrade cost saver SATA power splitter cable spares the expense of upgrading an existing power supply to connect new SATA drives; Cost-effective 2-pack provides a spare power cable for new installations or repairs; Keep a spare in your IT toolkit or at the test bench
DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner; 18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals; Provides sufficient length for internal cable management to minimize airflow impact in most configurations
Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end; Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply; Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance
Universal compatibility with computer power supplies with SATA connectors and popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, 24x DVD-RW Serial-ATA Internal OEM Optical Drive, Crucial MX100 256GB SATA 2.5-Inch Internal Solid State Drive, Inateck PCI-E to USB 3.0 5-Port PCI Express Card, Inateck Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card, Inateck Superspeed 4 Ports PCI-E to USB 3.0 Expansion Card